In operation inkjet printer, often there will be some operational errors, especially in the refilling work is prone to mistakes. Let Xu Li wrote inkjet machine introduce, how to avoid entering the refilling operation errors.

Myth 1: The ink cartridges can be added indefinitely

Many people believe that the ink cartridge is just a container containing it, as long as the cartridge surface is not broken, you can continue to add ink. In fact, this is a big misunderstanding.

First, the sponge inside the cartridge has a certain life span, when the sponge repeatedly "absorption - release" ink process or use more than a certain amount of time, the sponge ink absorption capacity will be reduced, so that the filling into the cartridge The ink will not be completely absorbed by the sponge, the pressure inside the ink cartridge nozzle portion becomes large, resulting in the flow of ink from the nozzle. This is a lot of people complain about the amount of raised ink printing better than the original ink for a reason.

Even more serious is the printer can not monitor this diversion to waste ink pad ink, which may cause the actual waste ink is much larger than the amount of waste ink pad printer ink monitor the amount of waste, so the waste ink in the printer has not been issued over tolerance alarm waste ink had overflowed, causing damage to the printer.

Secondly, in the cartridge and the ink inlet nozzle is to rely on a rubber seal between the cartridge and the nozzle seal guarantee to ensure the ink can not bleed. Long-term use or removal will make multiple cartridges aging seals, effect of variation, resulting in ink oozing from the joint portion, which would make the ink accumulation and mixed in the nozzle, resulting in mixing bottom of the ink, the direct result is print artwork discoloration, need to print more than one color artwork to return to normal after. This situation will lead to an increase the amount of waste and waste ink printer ink.

Third, no matter how good ink filled, after several filling has some impurities or dust is brought inside the cartridge. The dust will be taken to the ink flow and adsorption filter cartridges online, with the increase in dust, cartridge filter is clogged, resulting in poor ink flow, thus breaking and other problems make printing. If the filter is completely clogged, it may appear not print other failures. Therefore, the ink filling more than ten times or more than a year using a cartridge, it is best to consider replacing a new cartridge, avoid all kinds of problems.

Myth: printer waste ink over capacity, can be cleared with the program

Recently, super-capacity problem waste ink refilling printer before each discussion forum was also very enthusiastic. Many of my friends think that, after the waste ink super-capacity maintenance program only need to run the printer, the printer waste ink counter is cleared it.

In fact, maintenance procedures waste ink cleared just waste printer ink counter is cleared, the printer due to head cleaning, turn waste ink self-test causes still exist. If we just waste ink counter is cleared without cleaning printer waste ink pad, then the printer continues to work in the process, the waste ink pad in the waste ink will continue to increase. Once the waste ink pad full of waste ink printer, the waste ink is likely to flow out.

If the waste ink flows printer's power or control panel, it will cause a short circuit board, resulting in damage to the printer. Even waste ink does not overflow, when the case of printer ink excess waste, the waste ink pad out of the volatile vapors can also cause damage to the printer circuit boards, operation mechanism and even heads. Of course, there are some friends that when the printer waste ink over capacity warning, waste ink in the waste ink pad and not full and does not need to clean the waste ink pad. Indeed, in many places (especially in the southern regions of high temperature) alarm when the printer waste ink, waste ink pad and not much ink, combined printer alarm to leave a margin, so many friends to bring "no danger" impression. But we can not use this as no cleaning waste ink pad reason, because the amount of waste ink waste ink pad has many variables, such as high and low temperature, air humidity, size, whether the printer has Loumo, etc., and even the first a waste ink waste ink does not overflow alarm, that the second, third alarm it?

Here I recommend manufacturers consider changing the design of the waste printer ink cartridges are moved outside, to avoid damage to the printer waste ink overflow.

Myth: Use permanent chip enables the printer does not wash nozzle, province ink

With the promotion even for the system, the printer cartridge chips have been adopted permanently lot of friends. Now permanent chips generally has two functions: one without decoding, as long as the printer is off, the counter will be cleared on the chip, the printer that the ink cartridge is full. Second, avoid head cleaning, that is to say the boot after the printer head cleaning operation is not performed, you can save some ink.

Because of these advantages is the permanent chips, many are not using the system even for ordinary users will also chip on the cartridge converted into a permanent chip. However, due to the small amount of ordinary users everyday printing, if the printer unused for a long, ink nozzles within the inevitable result of the evaporation of water and the viscosity increases caused by blockage or dry. This can only rely on self-cleaning nozzle when the printer is turned on to solve the problem. And after the installation of the permanent chip, the printer will not boot cleaning nozzle, only the user will find not normal cleaning nozzle after printing, so that not only can not save ink, it will result in wasting more paper and ink.

Of course, even for large print volume users of the system, since every day requires a lot of printing, the ink was not yet dry ink bring out new, it is not prone to clogging. But many users complained that the system in use for some time even decreased print quality. It was always thought that this is due to aging or poor ink nozzles cause, but there once for a printer to use even for the system's cleaning nozzle, when using the second method of the series of articles in the nozzle inspection, found that although the number of nozzles capable of ejecting ink, but there are significant ink ejected bifurcation phenomenon, and after cleaning the nozzles, the print quality has increased.

The reason for this is that there is something in the nozzle portion partially clogged nozzle, during the test page prints, the nozzle can be part of the ink is ejected, it is not easy to feel this blockage. However, this blockage can lead to ejection of ink droplets smaller, insufficient coverage of the ink droplets on paper, but also lead to ejection of ink fly oblique, an offset in the positioning of paper, so that the printed diagram Contributed to feel coarse particles. The cause of clogging the nozzle portion, and the use of permanent chip, printer cleaning nozzle boot does have a certain relationship. When using permanent chip printer does not automatically cleaning nozzle, and the user does not feel blocked because without cleaning. Thus, it is easy for a long time adhesion of the impurities in the nozzle wall and it becomes not easy to be cleaned. Until you find the print quality is poor again when head cleaning can not be brought out of these impurities.

Xu Li pictorial inkjet machine, stable, high-speed, high quality, is a wise choice for achievement of your career!

Xu Li Inkjet Printer Sales hotline: 4009-611-106

Aurora inkjet machine: http: //www.chinapolar.net