During operation of UV printer, if you can pay more attention to these details in the nuances, it is possible to reduce the possibility of failure of the operation, also to speed UV printer effectively improve the UV printers operate more convenient and more smoothly. Here we introduce a few details should be noted:

A, UV printer to be placed horizontally on the ground

Due to its unique UV printers work, so put UV printer site must be flat on the ground, tilt, uneven ground can affect print quality and slow down the operating speed of the nozzle, thus affecting the overall printing speed. If not handled properly, there will be severe damage to the internal structure of the machine.

Try to UV printer placed on a flat, smooth surface, and maintain hygiene periphery to avoid stirring up dust or foreign matter into the inside of the machine.

Second, maintaining UV printers are clean

UV printers, like the external and internal, should be cleaned regularly, thousands do not wait until filled with a thick layer of dust, a problem before going to remedy. UV can be used outside of the printer wet soft cloth to scrub, clean liquid must be neutral substances such as water, must not use cleaners containing alcohol.

Internal mainly refers to the nozzle, ink road system, cleaning these parts will need special cleaning agents and cleaning methods, the dirt surface, try to use a dry rag. When important parts of cleaning nozzles, etc., must be given guidance Jinzun factory operations, or ask the manufacturer's sales staff for cleaning.

Three, UV printers should stay away from the weight

UV printers and other household appliances, devices, should avoid stress. Some customers will be placed on a platform other objects UV printers, so most likely crushed shell UV printer, platforms, etc., but some small things will fall inside the printer. Drinks, cups belonging to ban products, liquid type is strictly prohibited, to prevent liquid from entering the interior of the machine caused irreparable damage.

Fourth, turn off the machine before pulling power

Do not use UV printer before moving or need, to do a thorough job off. First turn off the UV printer power, reset, and let the nozzles on the ink tank cover, and then pull the power lines and signal lines. This can effectively prevent ink volatile, moving in when the nozzle is not easily damaged.

Prior to unplug the power, remember first turn off the machine, which can effectively reduce the possibility of damage to the machine.

Guangzhou Xu into electronic - Professional photo printing industry for over 10 years, Xu Li inkjet machine - high stability, high speed, high quality, the success of your career wise choice! Sales hotline: 4009-611-106